Shop headings: New Spares | Used Spares | Accessories | Brands
Lightweight 5mm battery plate in a silver finish, supplied with countersunk M8 screws
This is an upgrade to the standard steel plate, perfect for your Tonti framed special (it will also fit Cali 1100 and Cali EV based specials. On some models you may need to enlarge the cut out for the speedo cable
Availability varies on this part, check availability
14418200-z 14418200 GU14418200 14 41 82 00
1441 8200 1441.8200 14.41.82.00
£45.30
INC VAT
£37.75 EX VAT
Set of highly polished aluminium round barrel rocker covers (Guzzi ref. 17023550 or 17023560). Ideal for finishing off your restoration project
This rocker cover set also known as Guzzi ref. 14023550, these can be fited to square barrel models if fitted with adapter kit ACA30310
This part is available by special order, request a quote
17023560 GU17023560 17 02 35 60
1702 3560 1702.3560 17.02.35.60
£285.00
INC VAT
£237.50 EX VAT
Gorgeous polished aluminium reservoir cap for PS12 Brembo master cylinder fitted to front brake on many models, fits rear master cylinder on more recent models
Make your Guzzi stand out from the crowd!
This part is available by special order, request a quote
10430830 GU10430830 10 43 08 30
1043 0830 1043.0830 10.43.08.30
£32.50
INC VAT
£27.08 EX VAT
Dimensions:
For 35mm stanchions, 223mm usable handlebar, 75mm total height, 30mm tall stanchion clamp
Pair of adjustable Tommaselli clipons, quality aluminium castings and chrome plated tube
These clip ons pivot on the central bolt to adjust the handlebar angle, pull back angle is adjusted on the fork stanchion clamp. These clip ons are unsuitable for use with the PS12 handlebar master cylinder. Bar ends are held in by a rivet and some modification will be needed if you wish to fit bar end mirrors.
This part is available by special order, request a quote
£240.00
INC VAT
£200.00 EX VAT
Tough Xplorer top box / top case to match Hepco and Becker Xplorer panniers, ideal for enduro touring. Extremely endurable combination of black anodised aluminium sheet and coloured shock-resistant plastic.
This part is available by special order, request a quote
£391.00
INC VAT
£325.83 EX VAT
Black 55 litre Junior top box / top case to match Hepco and Becker Junior Flash panniers. This is the classic Hepco and Becker top box design. Sized to take two helmets
This is a great value top case which are quickly and securely fitted to any Moto Guzzi. The discreet and classic styling looks right on any Guzzi from the 1970's to the present day. Supplied with two keys. See LUA70127 for a Guzzi badge to fit these panniers. This latches to any Hepco or Guzzi rack with a oblong section at the rear, e.g. LUA61051
This part is available by special order, request a quote
£275.00
INC VAT
£229.17 EX VAT
Set of matt finished aluminium round barrel rocker covers (Guzzi ref. 17023550 or 17023560). Ideal for finishing off your restoration project
This rocker cover set is also known as Guzzi ref. 14023550, these can be fited to square barrel models if fitted with adapter kit ACA30310
This part is available by special order, request a quote
17023560 GU17023560 17 02 35 60
1702 3560 1702.3560 17.02.35.60
£285.00
INC VAT
£237.50 EX VAT
Polished aluminium alternator cover
For big twins with Bosch charging systems only. Not deep enough for later bikes with Ducati or Saprisa. See ACA18650 for deeper version.
This part is available by special order, request a quote
18001650-z 18001650 GU18001650 18 00 16 50
1800 1650 1800.1650 18.00.16.50
£81.70
INC VAT
£68.08 EX VAT
Replacement clutch plate for single plate RAM clutches
Torque setting for fitting this is 25Nm with a thread locking compound
This part is available by special order, request a quote
£146.00
INC VAT
£121.67 EX VAT
Pair of performance Dyna 12 volt 5 ohm single lead ignition coils with angled HT lead socket. These are a cooler running coil that offer improved starting and performance
Dyna Performance Replacment Coils are high tech, top quality coils, designed for maximum performance. They produce spark voltages in excess of 30,000 volts and spark energies second to none. Dynatek coils are available in a wide variety of resistances and output configurations to allow easy replacement of stock coils. Dynatek coils work with factory electronic ignitions, points, and aftermarket ignitions.
These are a different size and shape from the original coils so you will need to fabricate a suitable coil mount.
Individual coils available by special order, call us for details. See ELA00001 for crimp on HT lead connector
This part is due back in stock soon, call 01484 841395 to reserve yours
1471650
£190.00
INC VAT
£158.33 EX VAT